Development of a visualized underwater rescue-rope system

Testing TemperatureLuminus core board products are measured in an equivalent way the devices will operate in a system.The device is mounted on a 40ºC heat sink and allowed to reach thermal equilibrium under full power.The measurement is taken after equilibrium is reached.This method of measurement ensures that Luminus LEDs perform in the field just as they are specified. Specification Measurement Condition (9A,13.5 A)The tables on the following pages provide typical optical and electrical characteristics measured at 9A for white, 13.5A for Green and Blue.The associated junction temperature is T J = 70 ºC for white and T J = 75 º -90 º C for GB.The CBT-90 can be operated over a wide range of current drive conditions from 200mA to 18A and duty cycle from <1% to 100%). Luminus LED Test SpecificationsEvery Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus' products.