马赫数
机械
材料科学
层流
冷却液
雷诺数
高超音速
自由流
氦
流量(数学)
热力学
体积热力学
停滞温度
扩散
湍流
氮气
高超音速飞行
质量流
空气动力学
计算流体力学
边界层
作者
William Matthews,Hassan Saad Ifti,Paulo Martinez-Riviere,Wesley L. Harris,Samuel A. Maszkiewicz
出处
期刊:AIAA Journal
[American Institute of Aeronautics and Astronautics]
日期:2026-11-17
卷期号:: 1-15
摘要
The mixing of spanwise-varying coolant in hypersonic laminar flow is numerically and experimentally examined. Simulations were performed using US3D at Mach 7 with nitrogen injection at blowing ratios ranging from 0.0406% to 0.295% through a spanwise stepped blowing profile. Experiments were conducted at Mach 6.25 flows with unit Reynolds numbers of [Formula: see text] and [Formula: see text]. Argon, nitrogen, and helium were injected with blowing ratios from 0.0468% to 0.313% through injectors with varied uniformity. Pressure-sensitive paint was applied on a flat-plate model to spatially resolve the coolant film downstream of the injector. Results demonstrate that the coolant can be tailored with a spanwise-varying injection up to a limited streamwise distance. However, regardless of the initial injection profile, the film eventually converges to a Gaussian profile farther downstream. At a chosen blowing ratio, helium’s larger volume can saturate the film concentration to unity, diminishing the imposed spanwise profile entirely. In contrast, the spanwise profile is retained for the cases of nitrogen or argon. A comparison of these cases with a case of helium with a lower blowing ratio shows a similar retention of the spanwise profile downstream. However, the spanwise profile is not as prominent in the case of helium, likely because of its approximately three times higher diffusion coefficient compared to that of nitrogen or argon.
科研通智能强力驱动
Strongly Powered by AbleSci AI