Abstract A study has been made of the influence of temperature and of some other conditions in the calcination of gypsum on the properties of the product. No anhydrite was detected in the product of still calcination carried out at temperatures up to 200°, but calcination at 143° and above in a rotary calciner leads to appreciable rates of transformation to anhydrite. The formation of anhydrite appears to be catalysed by water vapour, and initiated to some extent by friction of the grains. The reactivity of the product of still calcination of the sample of gypsum studied appeared to be independent of the duration of calcinations taking more than 10 h., and was at a minimum for calcination at about 150°. The reactivity of the product of rotary calcination varied in a more complicated manner. In general, the higher the temperature of preparation the greater was the reactivity of hemihydrate. Anhydrite appears to offer favourable sites for the formation of gypsum nuclei and its formation tends to be associated with a more reactive product. However, it is evident that mechanisms other than the formation of anhydrite produce sites for the nucleation of gypsum and this matter is discussed.