Optimization of Operating Conditions of a Solid Oxide Fuel Cell System with Anode Off-Gas Recirculation Using the Model-Based Sensitivity Analysis

Designing a configuration of an efficient solid oxide fuel cell (SOFC) system and operating it under appropriate conditions are important for achieving a highly efficient SOFC system. In our previous research, the system layout of a SOFC system with anode off-gas recirculation was suggested, and the system performance was examined using a numerical model. In the present study, the system operating conditions were optimized based on the system configuration and numerical model developed in the previous paper. First, a parametric sensitivity analysis of the system performance was investigated to demonstrate the main operating parameters. Consequently, the fuel flow rate and recirculation ratio were selected. Then, the available operating conditions, which keep the system below the operating limits and satisfy the desired system performance (Ufuel > 0.7 and ηelec > 45%) were discovered. Finally, optimized operating conditions were suggested for three operating modes: optimized electrical efficiency, peak power, and heat generation. Depending on the situation, the demand for electricity and heat can be different, so different proper operating points are suggested for each mode. Additionally, using the developed model and the conducted process of this study, various optimized operating conditions can be derived for diverse cases.