Efficient and Green Flotation Separation of Molybdenite from Chalcopyrite Using 1-Thioglycerol as Depressant

The effective and environmental separation of chalcopyrite and molybdenite has long presented a challenge in mineral processing due to their similar floatability and close association at room temperature. This study explores the non-toxic 1-thioglycerol (1-TG) as a selective depressant for chalcopyrite–molybdenite flotation separation. An impressive separation effect was realized through single-mineral and mixed-mineral flotation experiments when using 1-TG as a depressant and kerosene as a collector. Contact angle measurements, zeta potential tests, and Fourier transform infrared spectroscopy (FT-IR) confirm the selective adsorption of 1-TG on the chalcopyrite surface, leading to enhanced surface hydrophilicity and the inhibition of collector adsorption. The depression mechanism is further elucidated through X-ray photoelectron spectroscopy (XPS), which demonstrates that it occurs via chemosorption between the thiol group in 1-TG and active iron sites on the chalcopyrite surface. These findings provide a potential efficient depressant for chalcopyrite–molybdenite flotation separation with low dosage, environmental friendliness, and human harmlessness.