Phase change materials encapsulated in a novel hybrid carbon skeleton for high-efficiency solar-thermal conversion and energy storage

Phase change materials (PCMs) with high energy density and stationary transition temperature are now considered promising solar energy storage mediums. However, their intrinsic poor light absorption, thermal conductivity and stability severely impede their potential applications. In this study, a novel carbonized hybrid aerogel (CHA) structure was firstly constructed by incorporating MXene and carbon nanofibers (CNFs) into a continuous phase polyamic acid salt (PAAS) aqueous solution, followed by directional freezing, vacuum drying, imidization, and carbonization processes. Finally, the composite PCMs (CPCMs) were fabricated by vacuum impregnation of PCMs into the CHAs. The CPCM, of which CHA consists of 20 wt% MXene and 10 wt% CNF@PDA, demonstrates high solar-thermal conversion efficiency (>91 %), improved thermal conductivity of 0.40 W·m−1·K−1, great thermal stability (enthalpy loss < 0.19 % after 100 cycling tests with no obvious leakage). The introduction of MXene and CNFs endows PCM with broader light absorption spectrum range. The skeleton matrix embedded with bonded MXene sheets and CNFs provides more thermal pathways, light absorption sites and carrying capacity, improves the thermal conductivity, solar-thermal conversion property and stability of PCM. In addition, CPCM also exhibits outstanding EMI SE (95 dB). The multifunctional and high-performance CPCMs shows potential to realize the effective capture and utilization of solar energy. This work provides a new strategy to construct stable and multifunctional hybrid carbon skeleton for high-efficiency solar-thermal conversion and energy storage.