能量收集
双稳态
压电
梁(结构)
转速
声学
功率(物理)
转动能
屈曲
非线性系统
涡轮机
能量(信号处理)
航程(航空)
物理
结构工程
工程类
航空航天工程
经典力学
光电子学
量子力学
作者
Houfan Du,Zhichun Yang,Shengxi Zhou
标识
DOI:10.1088/1361-6463/ace4d8
摘要
Abstract This paper proposes a novel piezoelectric buckling beam-type bistable energy harvester (PBBEH), which aims to efficiently harvest energy from rotational motions. The designed PBBEH is most made up of a piezoelectric buckling beam and a rotational disk which is used to provide low-speed rotational motions. A lumped parameter model is used for numerical analysis and the energy harvesting features of the PBBEH are analyzed. More importantly, experiments indicate that the PBBEH has excellent energy harvesting performance in the frequency range of 1–9 Hz, and experimental results indicate that the presented PBBEH has the output power of 28 μW. Additionally, the PBBEH has obvious nonlinear broadband dynamic characteristics. Both experimental and numerical results show that the output power curve has the tendency to increase and then decrease. Overall, in this paper, a good performance of this proposed harvester in ultra-low frequency rotational motions is verified, and it provides a possible design for self-powered wireless sensors used for structural heath monitoring in the wind turbine, the automobile wheel and other rotational machines.
科研通智能强力驱动
Strongly Powered by AbleSci AI