静电纺丝
微晶
材料科学
纳米纤维
溶剂
化学工程
聚酰胺
纺纱
纤维
亚稳态
结晶
合成纤维
聚合物
相(物质)
Crystal(编程语言)
晶体结构
高分子化学
相变
复合材料
水溶液
溶剂效应
沸腾
沸点
背景(考古学)
作者
Zichen Yang,Rei Udagawa,Dongyang Li,Minoru Ashizawa,Wataru Takarada,Hidetoshi Matsumoto
出处
期刊:Polymer
[Elsevier BV]
日期:2026-05-07
卷期号:358: 130186-130186
标识
DOI:10.1016/j.polymer.2026.130186
摘要
ABSTRACT This work investigates the impact of solvent properties and solution concentration on the internal structure, crystalline morphology, and thermal and mechanical properties of aligned polyamide 6 nanofibers (PA6 NFs). PA6 NFs with diameters ranging from approximately 120 to 480 nm were prepared via electrospinning and systematically characterized. Spinning solutions were formulated using two different fluorinated solvents: 2,2,2-trifluoroethanol (TFE, 7–10 wt%) and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP, 1.5–5.5 wt%). Owing to differences in solvating power and boiling point, the resulting NFs exhibited distinct variations in their crystal structures, crystallite sizes, and minimum achievable diameters. While NFs prepared from TFE solutions predominantly contained the metastable γ-phase, increasing the concentration of HFIP solutions induced a structural transition toward a stable α-phase-rich morphology. The minimum diameters for bead-free NFs were 280 nm for TFE-derived samples and 140 nm for HFIP-derived samples. These findings clearly indicate that solvent selection plays a critical role in governing the electrospinning process window, fiber morphology, and crystalline phase evolution of PA6 NFs, offering a practical route to tailoring their internal structure and macroscopic properties for advanced applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI