蒸汽重整
尖晶石
催化作用
化学工程
制氢
煅烧
高分辨率透射电子显微镜
材料科学
焦炭
合成气
烧结
海泡石
氢
化学
冶金
纳米技术
有机化学
原材料
工程类
透射电子显微镜
作者
Yishuang Wang,Chunsheng Wang,Mingqiang Chen,Jiaxin Hu,Zhiyuan Tang,Defang Liang,Wen Cheng,Zhonglian Yang,Jun Wang,Han Zhang
出处
期刊:Fuel
[Elsevier BV]
日期:2020-06-24
卷期号:279: 118449-118449
被引量:104
标识
DOI:10.1016/j.fuel.2020.118449
摘要
Extensive attentions have been paid to develop steam reforming of bio-oil, which was considered as one of the sustainable technologies for producing eco-friendly next-generation energy sources, such as syngas and hydrogen. In this work, the novel catalysts consisted of CoAl2O4 spinel and Co-phyllosilicate are facilely manufactured from xCo/Sepiolite (xCo/SEP) precursors and their catalytic performance has been studied in steam reforming of simulated bio-oil (SRSB). The effects of Co content on the microstructures and physicochemical properties of catalysts are analyzed by various characterizations such as N2 adsorption-desorption, XRD, FTIR, H2-TPR, HRTEM and XPS. The results reveal that the CoAl2O4 phases in these catalysts are evolved gradually from Co-lean nonstoichiometric Co1−xAl2O4−x to Co-rich CoAl2O4 structure with increasing Co loading, subsequently accompanying with the formation Co-phyllosilicate species (CPS) when the Co content exceeds 10 wt%. Among them, calcined 15Co/SEP sample with optimal configuration of Co-Al spinel and CPS leads to its reduced-counterpart possesses fine Co metal nanoparticles, abundant defective Co-Al-spinel and metal-support interface sites. It therefore presents the highest carbon conversion (95.7%) and H2 yield (68.8%) in activity experiment and a slight deactivation in 50 h of stability test during SRSB. The analyses of TG-DSC, XRD and HRTEM are conducted on used catalysts and discover xCo/SEP-derived catalysts exhibit promising coke resistance and metal sintering is the major issue for catalyst deactivation, which mainly caused by particle migration and coalescence mechanism due to the further reduction of CPS.
科研通智能强力驱动
Strongly Powered by AbleSci AI