Research on Geological-Engineering Integration Numerical Simulation Based on EUR Maximization Objective

Shale gas reservoirs, as representative reservoirs in the Sichuan Basin, have attracted widespread attention regarding development. Using gas reservoir numerical simulation to assist development has greatly improved the work efficiency of workers. However, traditional gas reservoir numerical simulation is widely criticized for its inability to effectively integrate with geological and engineering factors. In this study, we proposed a geological engineering integration method that considers pre-fracturing parameters. We further applied it to a typical well (N03) in a certain block of the Sichuan Basin. The reliability of the method was determined through historical fitting. Based on the N03 geological model, the optimization range of fracturing construction parameters in adjacent areas was determined with the goal of maximizing EUR. Recommended values for widely distributed construction parameter combinations of Class II reservoirs were provided through orthogonal analysis. The influence order of fracturing construction parameters is (1) sand addition strength, (2) cluster spacing, (3) construction displacement, (4) fracture fluid strength, and (5) horizontal segment length. Finally, we compared the simulated data with the actual case. The results showed that an integrated numerical simulation method including geological and engineering factors can comprehensively and accurately assist in reservoir development.