Fit of anterior restorations made of 3D-printed and milled zirconia: An in-vitro study

材料科学 立方氧化锆 牙科 复合材料 医学 陶瓷
作者
Stefan Rues,Nathalie Zehender,Andreas Zenthöfer,Wolfgang Bömicke,Christopher Herpel,Ali Ilani,Ralf Erber,Christoph J. Roser,Christopher J. Lux,Peter Rammelsberg,Franz Sebastian Schwindling
出处
期刊:Journal of Dentistry [Elsevier BV]
卷期号:130: 104415-104415 被引量:57
标识
DOI:10.1016/j.jdent.2023.104415
摘要

To evaluate the fit of zirconia veneers made by either 3D printing or milling. A typodont maxillary central incisor was prepared for a 0.5-mm-thick veneer and was reproduced 36 times from resin. Restorations were designed with a 20-µm-wide marginal and a 60-µm-wide internal cement gap, and were made from 3D-printed zirconia (LithaCon 3Y 210, Lithoz, n = 24) and milled zirconia (Cercon ht, DentsplySirona, n = 12). For milled zirconia, a drill compensation was needed to give the milling bur access to the intaglio surface. The restorations were cemented, cross-sectioned, and the cement gap size was analyzed by two raters. Inter-rater reliability was studied at 12 3D-printed veneers (intraclass correlation coefficient, ICC, mixed model, absolute agreement). Twelve remaining 3D-printed restorations were compared with 12 milled restorations regarding fit at three locations: marginally, labially, and at the incisal edge (Mann–Whitney U-tests, α<0.05). Inter-rater reliability was excellent, with an ICC single-measure coefficient of 0.944 (95%-confidence interval: [0.907; 0.966]). Gap sizes (mean ± SD / maximum) were 55 ± 9 / 143 µm at the margins, 68 ± 14 / 130 µm labially, and 78 ± 19 / 176 µm at the incisor edge for 3D-printed veneers. For milled veneers, gap sizes were 44 ± 11 / 141 µm at the margins, 85 ± 19 / 171 µm labially, and 391 ± 26 / 477 µm at the incisor edge. At the margins, the milled veneers outperformed the 3D-printed restorations (p = 0.011). The cement gap at the incisor edge was significantly smaller after 3D printing (p < 0.001). 3D-printed zirconia restorations showed clinically acceptable mean marginal gaps below 100 µm. Because drill compensation could be omitted with 3D printing, the fit at the sharp incisal edge was significantly tighter than with milling. The fit of 3D-printed ceramic anterior restorations meets clinical standards. In addition, 3D printing is associated with a greater geometrical freedom than milling. With regard to fit this feature allows tighter adaptation even after minimally invasive preparation.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
Bordyfan完成签到,获得积分10
刚刚
舒适念瑶完成签到 ,获得积分10
刚刚
刚刚
现代的南风完成签到 ,获得积分10
刚刚
从容冰凡发布了新的文献求助10
1秒前
17完成签到,获得积分10
1秒前
徐宇鹏完成签到 ,获得积分10
1秒前
自觉柠檬完成签到 ,获得积分10
2秒前
文静霸完成签到,获得积分10
2秒前
上上签完成签到,获得积分10
2秒前
江海小舟完成签到,获得积分10
2秒前
研友_X89EJ8完成签到,获得积分10
2秒前
汉堡包的应助被huidann采纳,获得10
2秒前
自由的舞蹈完成签到,获得积分10
3秒前
朴素的飞丹完成签到 ,获得积分10
3秒前
无限完成签到 ,获得积分10
3秒前
猫小咪完成签到,获得积分10
3秒前
000完成签到,获得积分10
4秒前
鱼仔完成签到,获得积分10
5秒前
6秒前
没有脑袋完成签到,获得积分10
6秒前
纯真的德地完成签到 ,获得积分10
7秒前
lkc完成签到,获得积分10
7秒前
阿巴阿巴完成签到,获得积分10
9秒前
Nidhogg完成签到,获得积分10
9秒前
FashionBoy的应助被ZZ采纳,获得10
9秒前
陈子期完成签到,获得积分10
9秒前
Bobogee完成签到 ,获得积分10
10秒前
ENZO完成签到,获得积分10
11秒前
重要的板凳完成签到,获得积分10
11秒前
11秒前
qducly2026完成签到,获得积分10
11秒前
niuniu完成签到 ,获得积分10
12秒前
WXR完成签到,获得积分10
12秒前
pingping完成签到,获得积分10
12秒前
hetao286完成签到,获得积分10
12秒前
lili完成签到 ,获得积分0
12秒前
hqc8866发布了新的文献求助10
12秒前
不想做实验噜完成签到,获得积分10
12秒前
Aunt_Black完成签到,获得积分10
13秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8173445
求助须知:如何正确求助?哪些是违规求助? 9565680
关于积分的说明 21781107
捐赠科研通 7767599
什么是DOI,文献DOI怎么找? 3431593
关于科研通互助平台的介绍 2555855
邀请新用户注册赠送积分活动 2476788