钢筋
码头
延展性(地球科学)
结构工程
材料科学
产量(工程)
消散
横截面
变形(气象学)
复合材料
工程类
热力学
物理
蠕动
作者
Junsheng Su,Rajesh Prasad Dhakal,Junjie Wang,Wenbiao Wang
出处
期刊:Earthquakes and Structures
[Techno-Press]
日期:2017-02-25
卷期号:12 (2): 201-211
被引量:22
标识
DOI:10.12989/eas.2017.12.2.201
摘要
This paper experimentally investigates the effect of yield strength of reinforcing bars and stirrups on the seismic performance of reinforced concrete (RC) circular piers. Reversed cyclic loading tests of nine-large scale specimens with longitudinal and transverse reinforcement of different yield strengths (varying between HRB335, HRB500E and HRB600 rebars) were conducted. The test parameters include the yield strength and amount of longitudinal and transverse reinforcement. The results indicate that the adoption of high-strength steel (HSS) reinforcement HRB500E and HRB600 (to replace HRB335) as longitudinal bars without reducing the steel area (i.e., equal volume replacement) is found to increase the moment resistance (as expected) and the total deformation capacity while reducing the residual displacement, ductility and energy dissipation capacity to some extent. Higher strength stirrups enhance the ductility and energy dissipation capacity of RC bridge piers. While the product of steel yield strength and reinforcement ratio ( $f_y{\rho}_s$ ) is kept constant (i.e., equal strength replacement), the piers with higher yield strength longitudinal bars are found to achieve as good seismic performance as when lower strength bars are used. When higher yield strength transverse reinforcement is to be used to maintain equal strength, reducing bar diameter is found to be a better approach than increasing the tie spacing.
科研通智能强力驱动
Strongly Powered by AbleSci AI