偷看
材料科学
复合材料
注塑成型
复合数
聚醚醚酮
片状模塑料
极限抗拉强度
复合材料层合板
剪切(地质)
热塑性塑料
聚合物
作者
Guangming Dai,Lihua Zhan,Chenglong Guan,Minghui Huang
标识
DOI:10.1177/0954008320903768
摘要
Interlaminar properties are one of the most important indicators of thermoplastic composite quality. A series of laminates with different moulding process parameters were prepared by unidirectional carbon fibre-reinforced polyether ether ketone (CF/PEEK) prepreg to explore the influence of moulding process parameters on the interlaminar properties of CF/PEEK composite laminates. The influence of the three process parameters, moulding pressure, moulding temperature, and holding time on the interlaminar shear strength (ILSS) of [0/90] 8 laminates was studied. The interlaminar shear failure modes of specimens under different moulding process parameters were compared, and the correlation between the ILSS and interlaminar shear failure modes was analysed. The results showed that the appropriate moulding pressure was 2 MPa, the proper moulding temperature range was 400–420°C and the holding time should not be less than 20 min. The main failure modes were tensile or compression when the laminates were moulded using proper process parameters; interlaminar shear failure might also appear in those moulded by non-optimised process parameters.
科研通智能强力驱动
Strongly Powered by AbleSci AI