材料科学
放电等离子烧结
相对密度
钻石
复合材料
复合数
热导率
微观结构
烧结
粒子(生态学)
扫描电子显微镜
粒径
化学工程
海洋学
地质学
工程类
作者
Kiyoshi Mizuuchi,Kanryu Inoue,Yasuyuki Agari,Shinji Yamada,Motohiro Tanaka,Masami Sugioka,Takashi Takeuchi,Jun-ichi Tani,Masakazu Kawahara,Jun Hee Lee,Yukio Makino
标识
DOI:10.4028/www.scientific.net/msf.638-642.2115
摘要
Diamond-particle-dispersed copper (Cu) matrix composites were fabricated from Cu-coated diamond particles by spark plasma sintering (SPS) process, and the microstructure and thermal properties of the composites fabricated were examined. These composites can well be consolidated in a temperature range between 973K and 1173K and scanning electron microscopy detects no reaction at the interface between the diamond particle and the Cu matrix. The relative packing density of the diamond-Cu composite increases with increasing sintering temperature and holding time, reaching 99.2% when sintered at a temperature of 1173K for a holding time of 2.1ks. Thermal conductivity of the diamond-Cu composite containing 43.2 vol. % diamond increases with increasing relative packing density, reaching a maximum (654W/mK) at a relative packing density of 99.2%. This thermal conductivity is 83% the theoretical value estimated by Maxwell-Eucken equation. The coefficient of thermal expansion of the composites falls in the upper line of Kerner’s model, indicating strong bonding between the diamond particle and the Cu matrix in the composite.
科研通智能强力驱动
Strongly Powered by AbleSci AI