The effects of grit-blasting on surface properties for adhesion

Abstract A detailed study of the effects of grit blasting with different alumina grits on the surface characteristics of mild steel and aluminium alloy substractes is reported. Non-contacting 3D-laser profilometry was used to characterise surface texture, and surface energy was measured by static contact angle techniques. The chemical composition of the surface was determined by XPS analysis. Adhesion characteristics were investigated by the measurement of strength of lap shear and tensile butt joints using a two-part room temperature curing epoxy adhesive. As initial joint strengths were relatively insensitive to the changes in grit-blasting parameters, further studies were based on joint response to accelerated ageing conditions. The results indicate that the changes in joint properties associated with roughened surfaces cannot be explained simply by the increased roughness characteristics, such as mechanical keying and increased effective bond area. It is evident that changes in physical and chemical properties of the surfaces, arising from the grit-blasting process contributed significantly to the joint behaviour.