Carbonized Waste Cotton/Stearic Acid Composites for Photo-Thermal Conversion and Heat Storage

Photo-thermal conversion is an effective method to utilise solar energy. The generated heat can be converted into electrical energy through the thermoelectric Seebeck effect. However, the key challenge in enhancing solar-thermal-electric conversion is to achieve efficient photo-thermal conversion and temperature difference control. Herein, new composite materials are prepared using abundant and cheap raw materials to simultaneously realise photo-thermal conversion, heat storage, and heat supply for a thermoelectric device. The composites consist of carbonised waste cotton and stearic acid (SA), where carbonised waste cotton can achieve efficient full spectrum photo-thermal conversion and SA can store the generated heat to maintain a stable temperature for a thermoelectric device. The best content of SA is found to be 85 wt-% in the composites due to uniform dispersion and ideal combination. The 3D netlike structure of carbonised waste cotton provides increased heat transfer paths and also prevents leakage of SA during phase change. The maximum phase change enthalpy is 203.6 J g−1 for the composite with 85 wt-% SA, which is almost the same as pure SA, assuring high density heat storage. A light-thermal-electric conversion device is further constructed based on as-prepared composites and a thermoelectric system. The generated electricity can light up a light-emitting diode with strong intensity.