塔菲尔方程
阳极
电解
电解质
阴极
介电谱
聚合物电解质膜电解
交换电流密度
极化(电化学)
电极
分析化学(期刊)
电化学
材料科学
电解水
化学
欧姆接触
电阻抗
氢
电解槽
微生物电解槽
等效电路
电化学电池
标准电极电位
离子
离子交换
无机化学
过电位
电压降
电导率
作者
José Carlos Martinez Rosales,Feina Xu,Garance Cossard,Marian Chatenet,Hari Gopi Kuppusamy,Jérémy Bianchin,Sophie Didierjean,Giuseppe Sdanghi,Jérôme Dillet,Gaël Maranzana
标识
DOI:10.1016/j.electacta.2026.150391
摘要
Anion exchange membrane water electrolysis (AEMWE) is a very promising technology for the large-scale production of decarbonized hydrogen thanks to the possibility of using inexpensive PGM-free materials to catalyze the water splitting reaction. The development of new electrocatalysts and the study of their integration in the electrolyzer requires the use of diagnostic techniques, one of the most powerful being Electrochemical Impedance Spectroscopy (EIS). EIS data can be difficult to deconvolute if both electrodes contribute to the total signal, and appropriate models are required for its interpretation. Therefore, herein a reference electrode was used to separate the individual contributions of the cathode and anode within a single AEMWE cell, and a 1D macrohomogeneous model that considers ion transport inside the electrode was validated and used to interpret the data. By fitting the model, Tafel slopes of 108 and 61 mV/dec were measured for the cathode and the anode, respectively, when operating a single cell using a stainless-steel anode and a PtRu cathode (using 1 M KOH electrolyte and 60°C). These results were then used to demonstrate the occurrence of a double Tafel slope regime for the anode, due to poor ion transport. Finally, the importance of thoughtful ohmic drop correction at high current densities is highlighted, as well as how this explains the differences in performance observed when operating the cell under different electrolyte feeding modes.
科研通智能强力驱动
Strongly Powered by AbleSci AI