法拉第效率
电化学
催化作用
纳米线
材料科学
氧化还原
硫化物
硫黄
选择性
原位
密度泛函理论
化学工程
无机化学
纳米技术
电极
化学
物理化学
冶金
有机化学
计算化学
工程类
生物化学
作者
Zhipeng Ma,Tao Wan,Ding Zhang,Jodie A. Yuwono,Constantine Tsounis,Junjie Jiang,Yu-Hsiang Chou,Xunyu Lu,Priyank V. Kumar,Yun Hau Ng,Dewei Chu,Cui Ying Toe,Zhaojun Han,Rose Amal
出处
期刊:ACS Nano
[American Chemical Society]
日期:2023-02-02
卷期号:17 (3): 2387-2398
被引量:103
标识
DOI:10.1021/acsnano.2c09473
摘要
Single-atom catalysts (SACs) have shown potential for achieving an efficient electrochemical CO 2 reduction reaction (CO2RR) despite challenges in their synthesis. Here, Ag 2 S/Ag nanowires provide initial anchoring sites for Cu SACs (Cu/Ag 2 S/Ag), then Cu/Ag(S) was synthesized by an electrochemical treatment resulting in complete sulfur removal, i.e., Cu SACs on a defective Ag surface. The CO2RR Faradaic efficiency (FE CO2RR ) of Cu/Ag(S) reaches 93.0% at a CO2RR partial current density ( j CO2RR ) of 2.9 mA/cm 2 under −1.0 V vs RHE, which outperforms sulfur-removed Ag 2 S/Ag without Cu SACs (Ag(S), 78.5% FE CO2RR with 1.8 mA/cm 2 j CO2RR ). At −1.4 V vs RHE, both FE CO2RR and j CO2RR over Cu/Ag(S) reached 78.6% and 6.1 mA/cm 2, which tripled those over Ag(S), respectively. As revealed by in situ and ex situ characterizations together with theoretical calculations, the interacted Cu SACs and their neighboring defective Ag surface increase microstrain and downshift the d-band center of Cu/Ag(S), thus lowering the energy barrier by ∼0.5 eV for *CO formation, which accounts for the improved CO2RR activity and selectivity toward related products such as CO and C 2+ products.
科研通智能强力驱动
Strongly Powered by AbleSci AI