弹簧钢
焊接
弹簧(装置)
碳钢
冶金
材料科学
质量(理念)
结构工程
工程类
腐蚀
物理
量子力学
作者
Lazarević, Miloš S.,Nedić, Bogdan P.,Bajić, Danica M.,Đurić, Stefan,Marušić, Luka
出处
期刊:Tehnicki Vjesnik-technical Gazette
[Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering i]
日期:2023-02-26
卷期号:30 (2)
标识
DOI:10.17559/tv-20220810110706
摘要
Explosive plating, or welding, is a process where part of the kinetic energy of the detonation of a certain amount of civil explosive material is used to accelerate the plate, which will form a welded joint upon an oblique impact on a stationary plate. The conditions that must be met to achieve a good weld are determined by welding criteria. Today, the most commonly used welding criteria are based on the speed of the collision point and the collision angle. In this paper a research is presented on explosion welding of two different steels and on quality of the obtained welded joint. Carbon steel and spring steel were welded using Amonex 4 explosive in different quantities. Basic characterization of the explosive was carried out: bulk density and detonation velocity were determined. Quality of the welded joint was inspected using the ultrasonic method. Possible intermetallic zones at the joint site created by the effect of increased temperature were examined by optical and scanning electron microscopy. Fracture toughness of the welded plates was determined, as well as hardness. The achieved experimental results were compared to theoretical predictions.
科研通智能强力驱动
Strongly Powered by AbleSci AI