六氟丙烯
离子液体
材料科学
聚合物电解质
陶瓷
固态
聚合物
电解质
化学工程
快离子导体
氟化物
离子电导率
高分子化学
无机化学
复合材料
有机化学
化学
电极
物理化学
共聚物
四氟乙烯
催化作用
工程类
作者
Maria Lucas,Renato Gonçalves,Tanja M. Kallio,Sara Pakseresht,Filipp A. Obrezkov,Stéphane Clain,Maria T. Malheiro,Senentxu Lanceros-Méndez,Carlos M. Costa
标识
DOI:10.1021/acsaem.5c00186
摘要
This work presents the development of solid polymer electrolytes (SPEs) for next-generation solid-state batteries. Solid polymer electrolytes were prepared based on a polymer matrix (poly(vinylidene fluoride)- co -hexafluoropropylene (PVDF-HFP)) doped with 16 wt % ceramic particles (barium titanate oxide (BTO), barium strontium titanate (BST), and lead zirconate titanate (PZT)) and an ionic liquid (IL, [PMPyr][TFSI]) at 40 wt %. The ionic liquid allows improvement of the ionic conductivity of the system, whereas the ceramic particles are included to enhance the mechanical strength and thermal stability of the system. The physical, morphological, and electrochemical characteristics of the SPEs were studied. The addition of ceramic particles and ionic liquids does not affect the morphology, which remains a compact morphology. In the same way, the degree of crystallinity, polymer phase, and thermal properties of the SPE remain similar to the pristine polymer after filler addition. The inclusion of both ceramic particles and the ionic liquid allowed improvement of battery performance. Ionic conductivity in the order of 2.41 × 10 –5 S cm –1 was achieved, accompanied by a battery capacity performance very close to theoretical values. Battery performance with PVDF-HFP/BST/IL (153 mAh g –1 ) and PVDF-HFP/BTO/IL (148.2 mAh g –1 ) composites proved to be successful in long-life cycling, bearing a higher capacity and stability compared to PVDF-HFP/IL (121.3 mAh g –1 ). When varying C rates were applied, the PVDF-HFP/BST/IL sample presented superior results, revealing higher stability when compared to the other SPE samples. In conclusion, the fine-tuning of the ceramic particle type within SPE formulations offers an avenue for battery performance optimization. In particular, the inclusion of BST in the hybrid SPE composite allows improvement of battery cycling stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI