材料科学
纤维增强塑料
极限抗拉强度
耐久性
复合材料
骨料(复合)
抗压强度
玻璃纤维
涡轮叶片
涡轮机
复合数
重新使用
蠕动
艾氏冲击强度试验
杨氏模量
材料性能
弹性模量
渗透(战争)
涂层
延展性(地球科学)
抗弯强度
结构工程
材料强度
环境科学
芯(光纤)
建筑业
混凝土性能
穿透深度
吸水率
压缩(物理)
作者
Waldemar Kępys,Barbara Tora,Vojtěch Václavík,Justyna Jaskowska-Lemańska
出处
期刊:Sustainability
[Multidisciplinary Digital Publishing Institute]
日期:2025-09-11
卷期号:17 (18): 8201-8201
被引量:7
摘要
Growing concerns about industrial waste have intensified the search for practical reuse strategies in the construction industry. One of the most problematic types of waste is decommissioned wind turbine blades, which are tough, lightweight glass fibre composites that resist conventional recycling. In this study, shredded glass fibre-reinforced polymer (GFRP) recovered from such blades was used to partially replace the 2–8 mm fraction of natural aggregate in concrete at 10%, 20%, 30%, and 40% by volume. X-ray fluorescence (XRF) analysis showed that the material consists mainly of SiO2, CaO, and Al2O3. X-ray computed tomography (XCT) revealed uneven fibre dispersion and a clear increase in porosity. Compared with the control mix, compressive strength reduced by 7–25%, splitting tensile strength by 18–24%, and elastic modulus by 17–35%. All mixes achieved watertightness class W12 (1.2 MPa), though the depth of water penetration increased with GFRP content. After 50 freeze–thaw cycles, frost-resistance class F50 was only met at 10% replacement. While these trends underline the performance trade-offs, they also point to a realistic route for diverting composite waste from landfills, reducing reliance on quarried aggregate and producing ‘green’ concretes for non-structural, prefabricated elements, where moderate strength is acceptable and reducing weight is advantageous.
科研通智能强力驱动
Strongly Powered by AbleSci AI