Polyaniline/reduced graphene oxide nanocomposites for electrochemical and solar cell applications

Abstract Polyaniline nanocomposites are synthesized via in situ chemical oxidation method by reinforcing reduced graphene oxide nanoparticles of various weight percentage. Structural, optical, thermal and electrochemical studies are performed to know the significance of introducing reduced graphene oxide into polyaniline and to analyse the importance of filler weight percentage in determining various properties of the nanocomposites. X-ray diffraction peak intensity is appeared to be maximum for nanocomposite doped with 2% filler. This composite shows minimum crystallite size and maximum photoluminescence intensity. Maximum I D /I G ratio obtained for 2% filler added nanocomposite from Raman spectroscopy studies proved that the presence of more surface defects and recombination of charge carriers are the reasons for enhanced photoluminescence. Thermal stability is found to be better for a nanocomposite with 1% reduced graphene oxide and obtained a mass retention of 60% even after heating up-to 600 °C. SEM images give various shapes of nanocomposite such as nanorods, spherical nanoparticles and button shaped nanocomposites for different filler weight percentage. Carbon to oxygen ratio is observed to be decreased as the filler percentage increased from 1% to 4% in SEM-EDAX analysis. Polymer nanocomposite with 1% reinforcement possess maximum UV and visible absorption and is found to be decreased as filler concentration increased from 1 to 4%. Electrochemical analysis is performed for polyaniline and 1% reduced graphene oxide reinforced polyaniline nanocomposite. Specific capacitance of the electrode is obtained as 212 F g −1 and 609 F/g for polyaniline and nanocomposite respectively at a scan rate of 0.01 V/S. Solar cell device performance study shows that power conversion efficiency is 5.54% for 1% reduced graphene oxide nanocomposite, 4.7% for 2% reinforced, 4.16% for 3% filler and 3.61% for 4% nanocomposite.