CO2 catch and release under direct sunlight

Temperature swing adsorption- or absorption-based CO2 capture requires substantial energy for regeneration and cooling purposes. Therefore, a cheap heat source and a passive cooling practice would dramatically reduce the energy cost. In the current issue of Cell Reports Physical Science, the Sun group presents their fabricated device that can alternate contact with sunlight to utilize solar energy for desorption and facilitate natural cooling for adsorption. This reduces the energy demand significantly to less than 1 MJ/kg CO2. Temperature swing adsorption- or absorption-based CO2 capture requires substantial energy for regeneration and cooling purposes. Therefore, a cheap heat source and a passive cooling practice would dramatically reduce the energy cost. In the current issue of Cell Reports Physical Science, the Sun group presents their fabricated device that can alternate contact with sunlight to utilize solar energy for desorption and facilitate natural cooling for adsorption. This reduces the energy demand significantly to less than 1 MJ/kg CO2. Solar-radiation-induced adsorption/desorption system for carbon dioxide captureGu et al.Cell Reports Physical ScienceNovember 1, 2022In BriefMuch of the energy demand in solid sorbents for CO2 capture comes from the temperature swing step. Gu et al. report the development of a solar-radiation-driven adsorption/desorption system with no additional energy required for the temperature swing process for CO2 capture. Full-Text PDF Open Access