结晶度
复合数
极限抗拉强度
接触角
淀粉
扫描电子显微镜
傅里叶变换红外光谱
材料科学
延伸率
氢键
化学工程
核化学
化学
分子
复合材料
有机化学
工程类
作者
Wei Gao,Wen Chung Wu,Pengfei Liu,Hanxue Hou,Xiangyang Li,Bo Cui
标识
DOI:10.1016/j.ijbiomac.2019.09.108
摘要
Corn/octenylsuccinated starch (C/OS) composite films incorporated with soybean oil (SO) at 0, 0.5%, 1.0%, 1.5% and 2.0% (w/w) were prepared to investigate their physicochemical properties. Fourier transform infrared analysis indicated that low concentrations of SO could facilitate molecular interaction and the formation of hydrogen bonds between starch molecules. All the films exhibited similar diffractograms and lower relative crystallinity values. Scanning electron microscopy and atomic force microscopy showed that the irregular and coarse surface structures of the films were obtained more frequently with increasing SO concentration. A higher contact angle of 76.14° and lower water vapor permeability of 2.46 × 10−12 g cm/cm2 s Pa were obtained with increasing SO content, with the exception of the 2.0% SO sample. The highest tensile strength value of 6.54 MPa was obtained by the C/OS-1.0% SO composite film, while the optimum elongation at break of 71.84% was exhibited by the C/OS-1.5% SO composite film.
科研通智能强力驱动
Strongly Powered by AbleSci AI