Fuels from tyres by pyrolysis in molten salts

烧焦 热解 废物管理 吨 化学计量学 碳氢化合物 一氧化碳 材料科学 化学 制浆造纸工业 工程类 有机化学 催化作用
作者
Nicholas J. Venning
出处
期刊:Aston University - Aston Publications Explorer [Aston University]
被引量:2
标识
DOI:10.48780/publications.aston.ac.uk.00010189
摘要

The current annual arisings of used car/van tyres in the U.K. has been found to be around 25m (188,000 tonnes). After the established reuse industries have taken their requirements this leaves 13.5m (102,000 tonnes) waste tyres; a quantity that can no longer be satisfactorily tipped. Laboratory scale experiments have shown that tyre can be pyrolised, using a molten carbonate system as the reaction medium, at rates corresponding to 14.9-42.7 g tyre/min. per litre of melt over the range 475 and 650°C. The product yields by weight of tyre input between the same temperatures are: hydrocarbon oil 23-36 wt. %, hydrocarbon gas 7- 18 wt. %, carbonaceous char 35-40 wt. %, steel 16.7 wt. % and inorganics 5.4 wt. %. The oil and gas evolve from the reactor and can easily be collected by conventional means. The steel and inorganics remain in the reactor although on the commercial scale it is proposed that they would be removed by physical and chemical methods respectively. The char was found to pose considerable handling problems and so a method was devised by which it could be gasified in the reactor. This was best achieved by passing air at a less than stoichiometric rate which gave a gaseous product rich in carbon monoxide. In addition this action provides heat for the system as a whole. The rates at 675-9000C were in the range corresponding to 5.6- 14.89 char/min. per litre of melt. A process flow chart has been proposed for a continuous operation based on these systems. Data from theoretical and experimental studies has enabled economic evaluations of several commercial scales to be carried out. These have shown that 4,000 and 10,000 t/yr operations show a DCF rate of return around 30% while a 50,000 t/yr operation shows 60% which would be attractive to an experienced scrap operator.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
在水一方的应助被嘿嘿采纳,获得10
1秒前
yy完成签到,获得积分10
2秒前
芒go完成签到,获得积分10
2秒前
无为发布了新的文献求助10
3秒前
tongtong发布了新的文献求助10
3秒前
Debra完成签到,获得积分10
4秒前
Taikonaut发布了新的文献求助10
5秒前
Owen的应助被li采纳,获得30
6秒前
asd888完成签到,获得积分10
6秒前
6秒前
在一完成签到,获得积分10
6秒前
7秒前
火山书痴完成签到 ,获得积分10
7秒前
李爱国的应助被syw采纳,获得20
8秒前
8秒前
听雨完成签到,获得积分10
8秒前
久某完成签到,获得积分20
9秒前
在水一方的应助被xiaowei666采纳,获得10
10秒前
胡萝卜完成签到,获得积分10
10秒前
Lin完成签到,获得积分10
10秒前
11秒前
Kumple发布了新的文献求助10
11秒前
upcomingbias完成签到,获得积分10
11秒前
syvshc的应助被WYL采纳,获得10
11秒前
Debra发布了新的文献求助10
12秒前
12秒前
tongtong完成签到,获得积分10
13秒前
KL完成签到,获得积分20
13秒前
13秒前
田様的应助被哭泣水壶采纳,获得10
14秒前
14秒前
美满的擎宇完成签到 ,获得积分10
14秒前
15秒前
15秒前
nadeem完成签到 ,获得积分10
15秒前
小庞发布了新的文献求助10
15秒前
香蕉觅云的应助被粥树采纳,获得10
15秒前
16秒前
超级无敌发布了新的文献求助10
16秒前
16秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Agyptische Geschichte der 21.30. Dynastie 510
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
基于界面调控的高效湿气发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8192020
求助须知:如何正确求助?哪些是违规求助? 9578648
关于积分的说明 21861105
捐赠科研通 7791458
什么是DOI,文献DOI怎么找? 3436765
关于科研通互助平台的介绍 2560502
邀请新用户注册赠送积分活动 2483544