材料科学
芳纶
复合材料
天然橡胶
嫁接
纤维
动态力学分析
环氧树脂
极限抗拉强度
抗撕裂性
表面改性
复合数
胶粘剂
粘附
天然纤维
聚合物
化学工程
图层(电子)
工程类
作者
Zhong Jin,Zhonglin Xia,Zhu Luo,Kun Xiang,H. Bo,Bin Li
出处
期刊:Polymer Materials Science and Engineering
[Sichuan University]
日期:2015-01-01
卷期号: (8): 56-61
摘要
Aramid fiber( AF) was grafted and coated with epoxy resin / hydroxyl-terminated liquid isoprene rubber( EP/LIR) in toluene solution on the basis of aramid fiber treatment with KOH solution,then master batch was made by incorporating mixture of the modified fiber,LIR and natural rubber,after that,aramid fiber reinforced natural rubber composites were prepared. The effects of AF grafting modification,concentration of KOH,content of EP on mechanical properties of the composites were investigated. The results of FT-IR,SEM and EDS show that the grafting modification on aramid fiber makes the adhesive interface force between fiber surface and composite matrix prominent. Mechanical properties and DMA reveal that when the concentration of KOH is 0. 1% and m( EP) / m( AF) = 16. 7 /100,the stress at 300% elongation and tear strength show a optimal value,respectively. DMA reveal that AF / NR composites have higher storage modulus and loss modulus and lower peak of loss factor after addition with EP,implying that the interfacial adhesion is enhanced.
科研通智能强力驱动
Strongly Powered by AbleSci AI