Effect of Salinity on Cr(VI) Bioremediation by Algal-Bacterial Aerobic Granular Sludge Treating Synthetic Wastewater

Heavy metal-containing wastewater with high salinity challenges wastewater treatment plants (WWTPs) where the conventional activated sludge process is widely applied. Bioremediation has been proven to be an effective, economical, and eco-friendly technique to remove heavy metals from various wastewaters. The newly developed algal-bacterial aerobic granular sludge (AGS) has emerged as a promising biosorbent for treating wastewater containing heavy metals, especially Cr(VI). In this study, two identical cylindrical sequencing batch reactors (SBRs), i.e., R1 (Control) and R2 (with 1% additional salinity), were used to cultivate algal-bacterial AGS and then to evaluate the effect of salinity on the performance of the two SBRs. The results reflected that less filamentation and a rougher surface could be observed on algal-bacterial AGS when exposed to 1% salinity, which showed little influence on organics removal. However, the removals of total inorganic nitrogen (TIN) and total phosphorus (TP) were noticeably impacted at the 1% salinity condition, and were further decreased with the co-existence of 2 mg/L Cr(VI). The Cr(VI) removal efficiency, on the other hand, was 31–51% by R1 and 28–48% by R2, respectively, indicating that salinity exposure may slightly influence Cr(VI) bioremediation. In addition, salinity exposure stimulated more polysaccharides excretion from algal-bacterial AGS while Cr(VI) exposure promoted proteins excretion.