电池(电)
阳极
电解质
工艺工程
材料科学
汽车工程
汽车工业
冷启动(汽车)
航程(航空)
金属锂
计算机科学
机械工程
核工程
功率(物理)
电极
复合材料
工程类
化学
热力学
航空航天工程
物理化学
物理
作者
Ryan Hughes,Christopher Vagg
出处
期刊:Batteries
[Multidisciplinary Digital Publishing Institute]
日期:2022-02-05
卷期号:8 (2): 13-13
被引量:15
标识
DOI:10.3390/batteries8020013
摘要
This paper addresses the thermal management of a solid polymer electrolyte battery system, which is currently the only commercialized solid-state battery chemistry. These batteries aim to increase the range of electric vehicles by facilitating a lithium metal anode but are limited by operational temperatures above 60 °C. The feasibility of a cold start procedure is examined, which would enable a solid polymer battery to be used, without preconditioning, in a wide variety of ambient temperatures. The proposed solution involves dividing the solid-state battery into smaller sub-packs, which can be heated and brought online more quickly. Thermal modelling shows a cold start procedure is theoretically feasible when using a small liquid electrolyte lithium battery at the start. The key bottlenecks are the rate at which the solid-state batteries can be heated, and the discharge rates they can provide. After resistive heating is used for the first solid-state module, all subsequent heating can be provided by waste heat from the motor and operating battery modules. Due to the insulation required, the proposed system has lower volumetric, but higher gravimetric energy density than liquid electrolyte systems. This work suggests that with suitable system-level design, solid-state batteries could be widely adopted despite temperature constraints.
科研通智能强力驱动
Strongly Powered by AbleSci AI