材料科学
热电发电机
薄脆饼
热电效应
热电材料
功率密度
共形映射
塞贝克系数
光电子学
余热
功率(物理)
工程物理
机械工程
复合材料
热导率
热力学
热交换器
物理
工程类
数学分析
数学
作者
Wenjie Li,Amin Nozariasbmarz,Ravi Anant Kishore,Han Byul Kang,Carter Dettor,Hangtian Zhu,Bed Poudel,Shashank Priya
标识
DOI:10.1021/acsami.1c16117
摘要
Thermoelectric generators (TEGs) exploiting the Seebeck effect provide a promising solution for waste heat recovery. Among the large number of thermoelectric (TE) materials, half-Heusler (hH) alloys are leading candidates for medium- to high-temperature power generation applications. However, the fundamental challenge in this field has been inhomogeneous material properties at large wafer diameters, insufficient power output from the modules, and rigid form factors of TE modules. This has restricted the transition of TEGs in practical applications for over three decades. Here, we successfully demonstrate large diameter wafers with uniform TE properties, high-power conformal hH TE modules for high-temperature application, and their direct integration on flue gas platforms, such as cylindrical tubes, to form large area flexible TEGs. This new conformal architecture design provides a breakthrough toward medium-/high-temperature TEGs over the conventional BiTe- and polymer-based flexible TEG design. A variable fill factor and greater flexibility due to the conformal design result in higher device performance as compared to conventional rigid TEG devices. Modules with 72-couple hH legs exhibit a device high-power-density of 3.13 W cm –2 and a total output power of 56.6 W under a temperature difference of 570 °C. These results provide a promising pathway toward widespread utilization of thermoelectric technology into the waste heat recovery application and will have a significant impact on the development of practical thermal to electrical converters.
科研通智能强力驱动
Strongly Powered by AbleSci AI