Dynamic recrystallization behavior of 6082 aluminum alloy during hot deformation

The dynamic recrystallization behaviors of 6082 aluminum alloy in the temperature range of 623–773 K and strain rate range of 0.01–5 s −1 were studied by electron back scattered diffraction (EBSD) and transmission electron microscopy (TEM). According to the experimental results, dynamic recrystallization occurs during hot deformation of 6082 aluminum alloy, although the true stress-strain curve has no obvious single peak characteristic, and the degree of dynamic recrystallization is closely related to the Z parameter. Hot compression with lnZ = 24.9014 (723 K, 0.1 s −1 ) gives rise to the highest recrystallization fraction of 38.6%. The initial critical strain of dynamic recrystallization was determined by the work hardening rate. The quantitative relationship between the critical strain and Z parameters was established: [Formula: see text]. Based on the EBSD analysis and measurement results, dynamic recrystallization kinetics models of 6082 aluminum alloy during hot deformation were deduced. Microstructure analysis showed that the subgrain structure formed in the original grain is coarsened by grain boundary migration, and the orientation difference increases continuously until a large-angle grain boundary forms, resulting in dynamic recrystallization of grains. The likely mechanism is continuous dynamic recrystallization.