复合数
共晶体系
材料科学
扩散
基质(水族馆)
钛
氧化物
氧气
石墨
图层(电子)
化学工程
复合材料
冶金
化学
微观结构
热力学
有机化学
工程类
地质学
物理
海洋学
作者
M. S. Li,C. Li,J. J. Li,Yang Zhou
摘要
The oxidation behaviors of a Ti(3)AlC(2)/20(vol%)TiB(2) composite, synthesized by means of in situ reactions of Ti, Al, graphite, and B(4)C powder mixtures under hot pressing, have been investigated at 1000 degrees-1400 degrees C in air. The Ti(3)AlC(2)/20TiB(2) composite followed the logarithmic oxidation law, and had a lower oxidation rate than the matrix Ti(3)AlC(2). During the oxidation at 1000 degrees-1400 degrees C, a continuous Al(2)O(3) formed on the composite, meanwhile other different oxides formed on the top surface of the Al(2)O(3) layer, depending on the oxidation temperature: discontinuous alpha-TiO(2) at below 1200 degrees C, mixture of Al(2)TiO(5) and TiO(2) at 1300 degrees C, and continuous Al(2)TiO(5) at 1400 degrees C. The selective oxidation of Al occurred at the oxide/substrate interface through inward diffusion of oxygen, and TiO(2) overgrew the Al(2)O(3) layer to form coarse grains through outward diffusion of titanium ions. When the temperature was above 1280 degrees C, Al(2)TiO(5) appeared due to a eutectic reaction between TiO(2) and Al(2)O(3). The incorporation of TiB(2) promoted the generation of great numbers of voids at the Al(2)O(3)/substrate interface and in the Al(2)O(3) inner layer, which is proposed as being the main reason for the Ti(3)AlC(2)/20TiB(2) composite to follow a logarithmic oxidation law.
科研通智能强力驱动
Strongly Powered by AbleSci AI