浇注性
材料科学
共晶体系
极限抗拉强度
延展性(地球科学)
冶金
热稳定性
微观结构
产量(工程)
热的
铸造
合金
复合材料
材料的强化机理
固溶强化
机械强度
增长率
拉伸试验
作者
Peng Hu,Xiaolu Hong,Liying Cui,Liangyu Wu,Jiang Zhang,Dahui Chen
标识
DOI:10.1002/adem.202502472
摘要
Heat‐resistant Al–Ce alloys have attracted considerable attention for high‐temperature applications owing to their excellent castability and intrinsic thermal stability. In this study, the combined effects of Mg addition and the cooling rate on the solidification behavior, microstructural evolution, mechanical properties, and thermal stability of Al–Ce alloys were systematically investigated. Increasing the cooling rate refined the α‐Al grains, produced finer and less segregated eutectic Al 11 Ce 3 , and suppressed the formation of primary Al 11 Ce 3 , leading to simultaneous improvements in strength and ductility. Mg addition altered the solidification behavior through solute‐induced constitutional undercooling, disrupting the coupled growth of α‐Al and eutectic Al 11 Ce 3 and promoting separate eutectic growth and primary Al 11 Ce 3 formation. As a result, Mg significantly enhanced the yield strength (YS) and ultimate tensile strength (UTS), primarily via solid‐solution strengthening after solution treatment, whereas the ductility decreased at high Mg contents. Thermal exposure at 300°C resulted in limited microstructural coarsening and high strength retention, which was attributed to the intrinsic stability of Al 11 Ce 3 and the retained strengthening effect of Mg in the solid solution. Overall, compared with conventional precipitation‐hardened Al–Si and Al–Cu alloys, Al–Ce–Mg alloys demonstrate superior thermal stability, highlighting their strong potential for high‐temperature applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI