数码产品
材料科学
平面(几何)
纳米技术
柔性电子器件
光电子学
工程物理
复合材料
电气工程
工程类
几何学
数学
作者
Chang Liu,Tadaaki Hoshi,Jiayi Shen,Atsushi Shinoda,Hisashi Kino,Tetsu Tanaka,Takafumi Fukushima
标识
DOI:10.35848/1347-4065/ad375f
摘要
Abstract This study focuses on enhancing the bendability of flexible interconnects with out-of-plane corrugation for flexible hybrid electronics. We propose two typical configurations of 3D corrugated interconnects: serpentine and trapezoidal. Three methods are introduced to fabricate these corrugated interconnects. The advantages and drawbacks of each fabrication strategy are discussed, and the impact of the 3D corrugation geometry and material on bendability is elucidated. In addition, the material properties of two types of negative photosensitive materials, SU-8 and F-PD (flexible-photoimageable dielectric), are compared. Results show that the resistance increase of 3D corrugated interconnects after a 5 mm radius bending test is drastically lower (by approximately 1900%–2000%) than that of conventional 2D planar interconnects.
科研通智能强力驱动
Strongly Powered by AbleSci AI