Vortex-blending matrix solid-phase dispersion and UPLC-Q-TOF/MS were proposed to extract and examine the urushiols from Toxicodendron vernicifluum bark

Toxicodendron vernicifluum bark has been used for many years as a component in foods and as a traditional herbal medication. Unfortunately, the presence of urushiols, which induce allergies, limits its application. This study used a vortex-blending matrix solid-phase dispersion microextraction technique to extract urushiols from Toxicodendron vernicifluum bark. HPLC was used to evaluate the amounts of the extracted urushiols (15:0, 15:1, 15:2, and 15:3). The modified magnetic adsorbent was prepared through an in situ coprecipitation method and characterized using a variety of techniques. The optimized extraction conditions are as follows: using magnetic Zeolite Socony Mobil-Five as an adsorbent, a 1:2 sample/adsorbent ratio, 2.5 min of vortex-blending time, 4 mL of 0.1% (V/V) trifluoroacetic acid-methanol as the elution solvent and 8 min of ultrasound time. There was good linearity and high repeatability in the method. Furthermore, the limits of detection for the urushiols ranged from 0.20 to 0.50 μg/mL. Under the optimized conditions, 50 compounds were identified by ultra high performance liquid chromatography and quadrupole time-of-flight mass spectrometry. These compounds included 8 phenolic acids, 9 monomeric urushiols, 11 urushiol dimers, 10 other components, and 11 flavonoids. The suggested approach, which has the advantages of few stages and high extraction efficiency over existing extraction procedures, is a potentially useful method for obtaining and evaluating urushiols in raw materials or extracts.