电气工程
碳化硅
电压
材料科学
光电子学
光伏系统
电容器
能量转换效率
开路电压
串并联电路
短路
能量转换
能量收集
功率(物理)
工程类
物理
热力学
冶金
量子力学
作者
Taewook Kang,Jinjoo Kim,Seongmo Park,Kwang-Jae Son,Kyunghwan Park,Jae‐Jin Lee,Sungweon Kang,Byoung Gun Choi
出处
期刊:Etri Journal
[Electronics and Telecommunications Research Institute]
日期:2018-12-12
卷期号:41 (2): 254-261
被引量:20
标识
DOI:10.4218/etrij.2018-0022
摘要
Distinct from conventional energy-harvesting (EH) technologies, such as the use of photovoltaic, piezoelectric, and thermoelectric effects, betavoltaic energy conversion can consistently generate uniform electric power, independent of environmental variations, and provide a constant output of high DC voltage, even under conditions of ultra-low-power EH. It can also dramatically reduce the energy loss incurred in the processes of voltage boosting and regulation. This study realized betavoltaic cells comprised of p-i-n junctions based on silicon carbide, fabricated through a customized semiconductor recipe, and a Ni foil plated with a Ni-63 radioisotope. The betavoltaic energy converter (BEC) includes an array of 16 parallel-connected betavoltaic cells. Experimental results demonstrate that the series and parallel connections of two BECs result in an open-circuit voltage Voc of 3.06 V with a short-circuit current Isc of 48.5 nA, and a Voc of 1.50 V with an Isc of 92.6 nA, respectively. The capacitor charging efficiency in terms of the current generated from the two series-connected BECs was measured to be approximately 90.7%.
科研通智能强力驱动
Strongly Powered by AbleSci AI