Vertical Power Delivery for High Performance Computing Systems with Buck-Derived Regulators

功率(物理) 计算机科学 输送系统 工程类 物理 生物医学工程 量子力学
作者
S. Krishnakumar,Mingeun Choi,Ramin Rahimzadeh Khorasani,Rohit Sharma,Madhavan Swaminathan,Satish Kumar,Inna Partin-Vaisband
出处
期刊: [Institute of Electrical and Electronics Engineers]
卷期号:: 2136-2142 被引量:17
标识
DOI:10.1109/ectc51529.2024.00364
摘要

With traditional power delivery architectures in state-of-the-art high-power (>1 kW) high-current density systems (>1 A/mm2), over 30% of the system-wide power is dissipated within the power delivery system, i.e., during the delivery of power from a printed circuit board (PCB) to functional die(s). Historically, in high-power systems, efficient low-power density voltage regulators have been placed on PCB, to minimize the conversion loss and advanced low-resistance interconnect technologies have been utilized to reduce the lateral routing loss in packaging power distribution network (PPDN). While power loss is reduced linearly with lower PPDN resistance, current reduction is desired due to the quadratic dependence of power on current. To efficiently deliver current from PCB to functional die, distributed vertical power delivery (DVPD) is preferred in this work. With this approach, power is delivered horizontally at high-voltage low-current and converted to low-voltage high-current close to functional die, near points-of-load (POLs), with optimal number of compact, power-efficient distributed on/in-interposer voltage regulators (VRs). Thus, lateral distribution of VRs is promising for mitigating conduction loss in both the VRs and horizontal packaging interconnect components. To increase the conversion efficiency and current density, an advanced network of parallel-connected vertically-stacked inductors and Gallium Nitride (GaN) power devices are considered. Analytical loss models and model-guided design methodology for optimizing the PCB-to-POL loss in a DVPD system are proposed in this work. A preferred power architecture for delivering 1-kW power to a functional 500-mm2die is determined based on the proposed models and methodology, exhibiting system-wide efficiency of 85.6% and power density of 2 W/mm2.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
科研通AI6.4的应助被盐巴采纳,获得10
刚刚
冷酷的天宇完成签到,获得积分10
1秒前
cdercder的应助被谨慎的夏槐采纳,获得10
1秒前
曹博完成签到,获得积分10
1秒前
Lucas的应助被全球采纳,获得30
2秒前
雪域完成签到,获得积分10
2秒前
光0921发布了新的文献求助10
2秒前
飞哥发布了新的文献求助10
3秒前
Crazy完成签到 ,获得积分10
3秒前
筱南竹折完成签到,获得积分10
3秒前
lejunia发布了新的文献求助10
3秒前
就滴滴勾儿完成签到,获得积分10
4秒前
Xuejiaolv完成签到,获得积分10
4秒前
Poisomber完成签到,获得积分10
5秒前
清脆诗兰完成签到 ,获得积分10
5秒前
海绵宝宝发布了新的文献求助10
6秒前
Chaoli完成签到,获得积分10
6秒前
谭访冬发布了新的文献求助10
6秒前
舟遥遥完成签到,获得积分10
6秒前
6秒前
机灵的大白菜完成签到,获得积分10
7秒前
yolo完成签到,获得积分20
7秒前
pomelo完成签到 ,获得积分10
7秒前
www完成签到 ,获得积分10
8秒前
满船清梦压星河完成签到 ,获得积分10
8秒前
wcli完成签到,获得积分10
8秒前
生动的猎豹完成签到,获得积分10
8秒前
李健的小迷弟的应助被sukiii采纳,获得10
8秒前
木木 12完成签到,获得积分10
8秒前
学术大善人完成签到,获得积分10
10秒前
陈zw完成签到,获得积分10
10秒前
chemqq完成签到,获得积分10
10秒前
AUAILNTC完成签到,获得积分10
11秒前
酆百川完成签到,获得积分10
11秒前
11秒前
泡泡玛特完成签到 ,获得积分10
11秒前
长脚蟹完成签到,获得积分10
12秒前
全球完成签到,获得积分20
12秒前
12秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8173474
求助须知:如何正确求助?哪些是违规求助? 9565719
关于积分的说明 21781727
捐赠科研通 7767700
什么是DOI,文献DOI怎么找? 3431597
关于科研通互助平台的介绍 2555855
邀请新用户注册赠送积分活动 2476832