CO-Free Fuel Processing of Water Gas Shift Feedstocks: Effect of Support on CuMn Spinel Performance

Abstract Cleaning up carbon monoxide (CO) in water gas shift feedstocks is crucial for fuel cell applications. The catalytic transformation of CO in hydrogen-rich feeds poses a significant challenge in environmental catalysis. To address this issue, a range of Cu–Mn-based monometallic and bimetallic catalysts with diverse supports (such as alumina, silica, zirconia, and titania) were employed. Temperature programming techniques were utilised to observe the reduction and oxidation behaviours of these catalysts. The investigation involved testing CO oxidation at various temperatures over copper and manganese-based supported catalysts in the presence of H 2 O and CO 2 (simulating realistic conditions). A positive impact of H 2 O on catalytic performance was noted, whereas CO 2 had a suppressive effect. Furthermore, the specific support materials (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) were studied to understand their roles in CO oxidation under realistic conditions. In the presence of water, alumina catalysts containing bimetallic metals (Cu–Mn) exhibited 100% CO conversion even at a lower temperature of 160 °C. Conversely, under the predominant influence of CO 2 , alumina catalyst (Cu–Mn) showed 55% CO conversion. The exceptional performance was attributed to CO preferential adsorption on highly active Cu–Mn sites and a small H 2 -oxidative atmosphere of the catalysts. The activity results highlighted the strong dependence of CO conversion on reaction temperatures, the presence of metals, and the types of supports. Overall, these findings suggest the potential use of these catalysts for H 2 purification under realistic conditions. Graphical Abstract