Design and Numerical Simulation of a SAR Double T Micromixer
作者
Md Readul Mahmud,Farhad Alam,Asma Begum
出处
期刊:Proceedings of the 4th International Conference of Fluid Flow, Heat and Mass Transfer日期:2026-06-01
标识
DOI:10.11159/ffhmt26.133
摘要
A novel split and recombine (SAR) micromixer '(𝑇𝑇) 𝛼 ' composed with two 'T' segments connected by a cylindrical duct is examined numerically employing ANSYS 15.The proposed '(𝑇𝑇) 𝛼 ' micromixer is composed of four identical elements that are connected at an angle 𝛼.The value of alpha is varied from 0° to 90° to analyze the effect on the SAR process and mixing performance for Reynolds numbers from 1 to 100.The micromixer exhibits better mixing performance and a lower pressure drop, thanks to its simple structure that facilitates splitting, recombination, and chaotic convection.A well-known SAR mixer, called 'Tear-drop', is also analyzed for comparison.The numerical data show that the SAR process strongly depends on the connecting angle 𝛼; the efficiency increases from 45% to 93% when the angle changes from 0 ° to 45 ° at 𝑅𝑒 = 50.The '(𝑇𝑇) 𝛼 ' mixer shows about two times less pressure drop than the 'Tear-drop' mixer, irrespective of connecting angles.Among all examined mixers, (𝑇𝑇) 45 ° yield the best performing mixer with the highest efficiency.