作者
Simon Amigues,Nicolas Bibent,Laëtitia Dubau,Frédéric M. Maillard,Mushrifa Syeda Zahan,Baranov, Alexander, A,Dario R. Dekel,Frédéric Jaouen
摘要
Decarbonized hydrogen can significantly reduce greenhouse gas emissions in many sectors. For mobility applications, proton exchange membrane fuel cells are already commercially available. However, due to their acidic environment, they require platinum-group metal (PGM) catalysts, which could limit their large-scale deployment. As an alternative and owing to their high pH environment, anion exchange membrane fuel cells (AEMFCs) can facilitate the implementation of catalysts without precious metals, which is more advantageous from economic and environmental viewpoints.To catalyze the hydrogen oxidation reaction (HOR) in an alkaline environment, nickel (Ni) shows great promise as a substitute for PGM-based catalysts at the anode of AEMFCs [1]. In order to improve the intrinsic activity and durability of nickel-based materials, one of the strategies studied in the literature is the core@shell nanostructuration involving a Ni-particle core and a (doped) carbon shell (Ni@C). Our approach consists of the mechanochemical synthesis of a nickel metal-organic framework from a Ni2+ salt and 1,3,5-benzenetricarboxylic acid, followed by its pyrolysis in different atmospheres [2]. Both the duration and atmosphere composition (binary or ternary gas mix of H₂, NH₃, N₂) during pyrolysis significantly affect the electrochemical performance of the resulting catalysts (Fig. 1a). Ni@C materials were mainly characterized using X-ray diffraction, X-ray photoelectron spectroscopy, various electron microscopy techniques as well as electrochemical techniques, including AEMFC cell testing. However, when these Ni@C catalysts with proven high HOR activity in rotating disk electrode setup were implemented at the anode of AEMFC, an unacceptably low initial open circuit voltage was observed. This effect was identified to result from Ni passivation, and two activation protocols were developed and thoroughly studied. Following activation of the Ni@C anode, unprecedented high performance was obtained, with peak power densities of 0.8, 1.0, and 1.2 W cm-2 at 80, 95, and 110 °C, respectively (Fig. 1b). To date, these are the best performance reported in the literature for an AEMFC without precious metals at the anode.