纳米颗粒
铜
材料科学
试剂
X射线光电子能谱
还原剂
碳纤维
制作
二甲基甲酰胺
溶剂
金属
纳米材料
纳米技术
化学工程
无机化学
核化学
化学
冶金
有机化学
病理
医学
复合数
复合材料
工程类
替代医学
作者
Nattaporn Kaittidanusorn,Tatsuki Nagata,Methasit Juthathan,Kazuki Tabaru,Nattapon Siengdung,Prompong Pienpinijtham,Tatsuya Tanaka,Takeyuki Suzuki,Thawatchai Tuntulani,Pannee Leeladee,Yasushi Obora
标识
DOI:10.1016/j.rechem.2024.101398
摘要
Nitrogen-doped carbon dots (NCDs) have been recognized as a promising supporting material for stabilizing metal nanoparticles. In this study, copper nanoparticles (CuNPs) decorated onto NCDs were easily prepared under mild conditions. Two types of Cu fabricated NCDs were prepared by using different Cu precursors – CuCl2 and N,N-dimethylformamide (DMF)-protected CuNPs, where DMF was employed as a multifunctional reagent serving as a reducing agent, stabilizer, and solvent for the synthesis of the CuNPs. The resulting NCDs with Cu species were characterized using ICP-AES, FT-IR, XPS, XRD, and STEM. We found that the Cu precursor greatly influence the fabrication of Cu species on NCDs, with the Cu content of the CuNPs/NCDs being almost twice that of CuCl2/NCDs. Furthermore, when DMF-protected CuNPs were used, nano-sized Cu particles ranging from 4 to 11 nm were immobilized on NCDs surface, whereas single-atom Cu were observed when using CuCl2. This indicates that DMF-protected CuNPs are a suitable source of Cu for the preparation of nano-sized Cu on NCDs.
科研通智能强力驱动
Strongly Powered by AbleSci AI