结晶度
环氧乙烷
电解质
氧化物
材料科学
电化学
锂离子电池
化学工程
纳米颗粒
电池(电)
锂电池
锂(药物)
聚合物
化学
离子
复合材料
有机化学
纳米技术
冶金
共聚物
物理化学
电极
离子键合
工程类
物理
内分泌学
医学
功率(物理)
量子力学
作者
Xiaolong Li,Li Yang,Dingsheng Shao,Kaili Luo,Lei Liu,Zhenyu Wu,Zhigao Luo,Xianyou Wang
摘要
ABSTRACT Poly(ethylene oxide) (PEO) is one of the most promising candidates in polymer solid‐state electrolyte. However, the polymer matrix has a high degree of crystallinity and thus manifests low conductivity, which restricts its application in all solid‐state lithium‐ion battery. Herein, a new composite polymer electrolyte (PLWLS), which is comprised of PEO, LiClO 4 , and the independently synthetized walnut‐like SiO 2 (WLS) as nano‐fillers, is designed and prepared by the tape‐casting way. The optimum mass fraction of walnut‐like SiO 2 is determined by physical and electrochemical characterization. The result shows that the PLWLS‐15 with 15 wt % walnut‐like SiO 2 nanoparticles has a crystallinity of 13.7%. Similarly, the maximum tensile strength is improved greatly. The assembled all‐solid‐state lithium‐ion battery with LiFePO 4 /PLWLS‐15/Li exhibits a higher discharge capacity of 167 mAh g −1 at 0.1 C (1C = 170 mAh g −1 ) and 143 mAh g −1 at 0.5 C in first cycle, lower voltage polarization and better cycle performance. Therefore, adding nanoparticle into PEO‐based solid‐state electrolyte could effectively promote the mechanical property and electrochemical performance, and thus provide a possibility of application for PLWLS‐15 in next generation all solid‐state lithium battery. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137 , 48810.
科研通智能强力驱动
Strongly Powered by AbleSci AI