摘要
Silicon is considered as a highly promising anode material for lithium-ion batteries because of its exceptionally high theoretical specific capacity of 3579 mAhg -1 -almost an order of magnitude higher than that of conventional graphite (372 mAhg -1 ). In addition to its high capacity, silicon is abundant, environmentally friendly, and cost-effective. However, its practical application is hindered by substantial volume expansion of up to ~300% during lithiation and delithiation, leading to structural degradation and shortened battery lifespan. Similarly, among the cathode materials, LiFePO 4 (LFP) offers several advantages such as excellent thermal stability, extended durability, and safety. It has a theoretical specific capacity of 170 mAhg -1 . Li-ion batteries with LFP cathodes have a long cycle life with excellent charging/discharging performance. However, the intrinsic low electronic conductivity and moderate ionic diffusion rate of LFP limit its rate capability and overall electrochemical performance. To overcome these challenges, surface modification strategies—particularly the application of ultrathin protective coatings—have been widely investigated. Atomic Layer Deposition (ALD) offers a powerful approach for this purpose, providing atomic-level control over film thickness and exceptional coating uniformity. The resulting ultrathin, conformal layers protect the electrode from direct electrolyte contact, suppressing parasitic side reactions and preventing the dissolution of active materials. Moreover, ALD coatings can enhance lithium-ion diffusion and reduce charge-transfer resistance, while simultaneously buffering volume changes and promoting the formation of a robust solid electrolyte interphase (SEI) layer. These combined advantages make ALD a highly effective method for improving the long-term stability and performance of lithium-ion batteries. Our work investigates the preparation, electrochemical performance, and effects of ZnO ALD coatings and electrolyte additives on silicon/graphite (Si/Gr) composite anodes, providing valuable insights into strategies for enhancing battery performance and long-term durability. [1,2] We also demonstrate that modifying the LFP cathode surface with ultrathin ALD-grown alumina films enhances Li-ion charge transfer, improves rate performance, and effectively mitigates chemical degradation. [3] Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and operando X-ray diffraction (XRD) were employed to provide detailed insights into the structural and interfacial evolution of the electrodes. We acknowledge support from VEGA 2/0135/26, M-ERA.NET SusHiBatt, APVV-24-0321 and the European Union’s Horizon Europe research and innovation program under grant agreement No. 101192848 (FULL-MAP). References [1] P. P. Sahoo, A. Güneren, B. Hudec, M. Mikolášek, A. Nada, M. Precnerová, M. Mičušík, Z. Lenčéš, P. Nádaždy, K. Fröhlich, ACS Appl. Nano Mater. 2024 , 7 , 18486. [2] P. P. Sahoo, A. Güneren, B. Hudec, M. Mičušík, P. Jr. Švec, M. Precnerová, A. Nada, Z. Lenčéš, K. Fröhlich, ACS Appl. Energy Mater. 2025 , 8 , 6925. [3] P. P. Sahoo, B. Hudec, M. Mičušík, M. Mikolášek, M. Precnerová, P. Jr. Švec, P. Nádaždy, S. Mičky, M. Zubair, P. Siffalovic, K. Fröhlich, ACS Appl. Energy Mater. 2025 , 8 , 10594.