搅拌摩擦焊
材料科学
焊接
残余应力
复合材料
接头(建筑物)
极限抗拉强度
失真(音乐)
对接接头
冶金
压力(语言学)
结构工程
光电子学
CMOS芯片
工程类
哲学
语言学
放大器
作者
Weiliang He,Jinglin Liu,Wei Hu,Gongdong Wang,Wenjing Chen
标识
DOI:10.1515/htmp-2019-0005
摘要
Abstract Friction stir welding (FSW) can achieve a sound welding joint, but its residual stress and distortion cannot be avoided due to the non-uniformity of temperature distribution during welding. Stationary shoulder friction stir welding (SSFSW) was employed to butt weld 6005A-T6 aluminum alloy plates. The effects of welding speeds ranging from 200 mm/min to 600 mm/min on residual stress and distortion were investigated in detail. A thermo-mechanical model was utilized to compare the residual stress distribution between conventional FSW and SSFSW. SSFSW was beneficial to decreasing the peak temperature of stir zone (SZ) and then obtaining a narrower SZ. The peak residual stress produced by SSFSW was 50% lower than that by conventional FSW and a narrower tensile stress region was attained by SSFSW. Moreover, the stationary shoulder applied a function of synchronous rolling during the welding, which controlled the distortion effectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI