Hermetic wafer level packaging of MEMS components using through silicon via and wafer to wafer bonding technologies

作者
Kai Zoschke,Charles-Alix Manier,Martin Wilke,Nils Jürgensen,Hermann H. Oppermann,David Ruffieux,James R. Dekker,Hannele Heikkinen,Silvio Dalla Piazza,Giorgio Allegato,K.-D. Lang
标识
DOI:10.1109/ectc.2013.6575770
摘要

This paper presents the fabrication steps of a MEMS package based on silicon interposer wafers with copper filled TSVs and bonded cap wafers for hermetic sealing of resonator components. All processes were performed at 200 mm wafer level. For interposer fabrication a standard process flow including silicon blind hole etching, isolation, copper filling, wafer front side redistribution, support wafer bonding, wafer thinning, and TSV backside reveal was applied. As interposer backside metallization, appropriate I/O terminals and seal ring structures were deposited by semi-additive Au and Au+Sn electro plating. Following, getter material was deposited onto the interposer wafers which were 90 μm thick and still mounted onto carrier wafers. Subsequently, the I/O terminal pads of the interposer were stud bumped and finally more than 5000 quartz resonator components were assembled onto each interposer wafer by Au-Au direct metal bonding. The cap wafer was equipped with 200 μm deep dry etched cavities and electro plated Au seal rings around them. Finally, both cap and interposer wafers were bonded together using a wafer to wafer bonder and an adapted AuSn soldering process scheme. In a last step, the carrier wafer was removed from the former front side of the interposer wafer and wafer level testing was performed. From a total of 4824 tested devices we found that more than 75 % were sealed properly under vacuum. The getter appears to be effective leading to ~0.1 mbar equivalent air pressure and cavities without getter appear to reach residual air pressure between 1-2 mbar. The used fabrication processes and final results will be discussed detailed in this manuscript.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
脑洞疼的应助被Cuillli采纳,获得10
1秒前
小蘑菇的应助被凪凪采纳,获得10
1秒前
搜集达人的应助被负责金毛采纳,获得10
1秒前
cheng完成签到,获得积分10
2秒前
彭于晏的应助被eating采纳,获得10
2秒前
2秒前
康谨发布了新的文献求助10
2秒前
3秒前
三秋完成签到,获得积分10
3秒前
科目三的应助被动人的向松采纳,获得30
3秒前
myx发布了新的文献求助10
3秒前
4秒前
4秒前
xzcx发布了新的文献求助10
4秒前
谦让的发箍完成签到,获得积分10
4秒前
闫大蛇发布了新的文献求助10
6秒前
6秒前
上官若男的应助被曾经凌萱采纳,获得10
6秒前
6秒前
7秒前
空集发布了新的文献求助10
7秒前
themoomofeye完成签到 ,获得积分10
7秒前
lalala发布了新的文献求助10
8秒前
凪凪完成签到,获得积分10
8秒前
9秒前
9秒前
想吃泡粉发布了新的文献求助20
9秒前
852的应助被gg采纳,获得10
10秒前
wwq发布了新的文献求助10
10秒前
shuimu9527完成签到,获得积分10
10秒前
菘蓝发布了新的文献求助10
11秒前
11秒前
11秒前
11秒前
滴滴完成签到,获得积分10
11秒前
12秒前
凪凪发布了新的文献求助10
12秒前
12秒前
匆匆发布了新的文献求助10
12秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8193925
求助须知:如何正确求助?哪些是违规求助? 9579945
关于积分的说明 21868504
捐赠科研通 7793568
什么是DOI,文献DOI怎么找? 3437462
关于科研通互助平台的介绍 2560923
邀请新用户注册赠送积分活动 2484250