控制理论(社会学)
执行机构
稳健性(进化)
理论(学习稳定性)
趋同(经济学)
最小相位
弗洛奎特理论
乘数(经济学)
计算机科学
数学
稳定性判据
控制系统
拉格朗日乘数
可控性
振荡(细胞信号)
情态动词
鲁棒控制
对角线的
相平面
偏移量(计算机科学)
相(物质)
输出反馈
圆判据
边界(拓扑)
特征向量
线性系统
最优控制
传递函数
投影(关系代数)
指数稳定性
作者
Zihong Li,Hangyu Lu,Ning Zhang,Hongliang Wang,Dawei Pi
标识
DOI:10.1177/10775463261481156
摘要
In distributed vehicles with corner modules, independent wheel steering improves chassis motion freedom but weakens mechanical constraints and increases reliance on the X-by-wire feedback chain. This makes wheel-end steering more sensitive to kingpin disturbances and time delays. Existing studies on disturbance rejection for steering systems often ignore feedback delays or simplify them as a single continuous delay, which may distort stability prediction and gain selection. To address this issue, a composite closed-loop model for a disturbance-observer-based corner-module steering system is proposed by introducing the disturbance estimation error into the state vector. Continuous actuator delay and sampling-induced discrete delay are formulated as a hybrid feedback delay. Based on the resulting hybrid-delay model, the semi-discretization method is used to construct the characteristic matrix, and the stability region in the ( K P , K D ) plane is obtained from Floquet multipliers. The results show that the proposed method extracts the stability boundary of the hybrid-delay system and divides the stable region into low frequency, high frequency, and zero phase angle regions according to the dominant multiplier phase. An optimal gain point with fast convergence and weak oscillation is identified using the dominant multiplier modulus and the normalized convergence index based on the step size. Compared with an equivalent continuous-delay model, the hybrid-delay model gives different optimal gains and a higher convergence index as the sampling-delay ratio increases.
科研通智能强力驱动
Strongly Powered by AbleSci AI