Optical Chemical Sensor Based on Fast-Protein Liquid Chromatography for Regular Peritoneal Protein Loss Assessment in End-Stage Renal Disease Patients on Continuous Ambulatory Peritoneal Dialysis

Point-of-care testing (POCT) devices are becoming increasingly popular in the medical community as an alternative to conventional laboratory testing, especially for home treatments or other forms of outpatient care. Multiple-use chemical sensors with minimal requirements for disposables are among the most practical and cost-effective POC diagnostic instruments, especially in managing chronic conditions. An affordable, simple, and easy-to-use optical sensor based on fast protein liquid chromatography with direct UV absorption detection was developed for the rapid determination of the total protein concentration in effluent peritoneal dialysate and for the assessment of protein losses in end-stage renal disease (ESRD) patients on constant ambulatory peritoneal dialysis (CAPD). The sensor employs non-disposable PD-10 desalting columns for the separation of molecules with different molecular weights and a deep UV LED (maximum at 285 nm) as a light source for optical detection. The analytic procedure is relatively simple, takes 10–15 min, and potentially can be performed by patients themselves or nursing staff without laboratory training. Preliminary clinical trials on a group of 23 patients on CAPD revealed a good concordance between the protein concentrations in dialysate samples measured with the sensor and an automated biochemical analyzer; the mean relative error was about 10%, which is comparable with routine clinical laboratory methods.