Cu:TiO 2 nanoparticles prepared by planetary ball mill with enhanced sonophotocatalytic performance with visible light

Abstract In this research, pure and Cu(II)‐doped TiO 2 nanoparticles (NPs) were synthesized via a simple and nontoxic approach to fabricate a nanocatalyst for the oxidative sonophotocatalytic degradation of phenol. TiO 2 NPs were prepared using a solvothermal method and doped with Cu(II) by high‐energy planetary ball mill. The as‐synthesized NPs were identified and characterized by X‐ray diffraction, energy‐dispersive X‐ray, and transmission electron microscopy techniques. The doped NPs were used for the first time in pollutant decomposition using phenol as a model pollutant in low‐energy and low‐frequency ultrasound at room temperature and pH = 7 in the presence of visible light. The progress of the pollutant degradation was followed by UV–Vis spectrophotometry. After about 60 min of sonophotocatalytic process (dual irradiation [visible light + ultrasound] in the presence of doped NPs), around 75% of the phenol degraded, with a rate constant of about 0.024 min −1 . The sonophotocatalytic process was compared with photocatalysis and sonocatalysis processes conducted in the same conditions. Importantly, the combination of visible light and ultrasound irradiation in a sonophotocatalytic decomposition reaction represented about 58% of the synergy effect, demonstrating a positive synergy between the photocatalytic and sonocatalytic processes. The optimum condition was used to degrade the commercial sample (amoxicillin) with excellent performance. The reusability test represented the excellent stability of doped catalysts within four consecutive runs with less fading in their sonophotocatalytic reaction. This feature proves the reusability potential of the doped catalyst to be used in the commercial and industrial directions. The performance of the doped catalyst was affected severely by the addition of different scavengers, and based on the results, the sonophotocatalytic mechanism was discussed.