Preparation and optimization of WPU dispersion from polyether/polyester polyols for film and coating applications

Castor oil and polytetramethylene ether glycol (PTMG) are used as polyester and polyether polyols. The waterborne polyurethane (WPU) resin is synthesized from polyether/polyester polyols following a ketone and catalyst-free pre-polymerization process. WPU resins are prepared from PTMG/castor oil with various hydroxyl molar ratios, such as 1/0, 3/1, 1/1, 1/3, and 0/1. The results indicate that the WPU dispersions has a long shelf-life, high colloidal stability, and narrow distribution of molecular size. The addition of castor oil can increase the proportion of the cross-linking density, hard segments and hydrogen bonds of the WPU molecular chain. The addition of PTMG/castor oil increases from the molar ratio 1/0 to 1/1, the tensile strength of WPU film increases from 17.1 MPa to 25.6 MPa; the T5% increases from 250°C to 262°C; the water swelling ratio at 24 h decreases from 33.2 g/g to 19.4 g/g. The results indicate the using PTMG/castor oil can improve the mechanical strength, water resistance, and thermal stability of WPU film. The WPU could be applied to wood coatings with high properties. This study provides a cleaner process for optimizing the performance of WPU resin, which can replace conventional ketone- and organotin-based films and coatings.