A Three-Dimensional Micromixer Using Oblique Embedded Ridges

作者
Lin Li,Qingde Chen,Guodong Sui,Jing Qian,Chi-Tay Tsai,Xunjia Cheng,Wenwen Jing
出处
期刊:Micromachines [Multidisciplinary Digital Publishing Institute]
卷期号:12 (7): 806-806 被引量:9
标识
DOI:10.3390/mi12070806
摘要

A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting-recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting-recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
健忘映寒完成签到,获得积分10
刚刚
完美世界的应助被Heven88采纳,获得10
刚刚
刚刚
完美世界的应助被源宥冰采纳,获得10
1秒前
2秒前
shilong.yang发布了新的文献求助10
2秒前
angki77发布了新的文献求助10
3秒前
天天快乐的应助被过时的文博采纳,获得10
4秒前
py发布了新的文献求助10
4秒前
5秒前
斯文败类的应助被Mao采纳,获得10
5秒前
科研通AI6.4的应助被ccdw采纳,获得10
7秒前
晴慕紫晓完成签到,获得积分10
7秒前
7秒前
7秒前
lll发布了新的文献求助10
7秒前
angki77完成签到,获得积分10
8秒前
万荼巳蕊发布了新的文献求助10
9秒前
9秒前
辛道月完成签到 ,获得积分10
10秒前
10秒前
flower完成签到 ,获得积分10
10秒前
10秒前
gingertea完成签到,获得积分10
10秒前
科研通AI6.2的应助被Candy622采纳,获得10
10秒前
12秒前
13秒前
燕晓啸完成签到 ,获得积分0
14秒前
14秒前
脑洞疼的应助被Laney采纳,获得10
15秒前
hyn完成签到 ,获得积分10
15秒前
科研通AI65的应助被龍鷹采纳,获得10
15秒前
涂鹏辉发布了新的文献求助10
15秒前
JohnCZz完成签到,获得积分10
16秒前
香蕉觅云的应助被xie采纳,获得10
16秒前
Jessie完成签到 ,获得积分10
16秒前
beplayer1完成签到,获得积分0
18秒前
18秒前
18秒前
19秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Boundaries and Bodhisattvas 500
高分子基功能界面水蒸发材料与应用研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8181408
求助须知:如何正确求助?哪些是违规求助? 9571330
关于积分的说明 21817615
捐赠科研通 7777856
什么是DOI,文献DOI怎么找? 3433479
关于科研通互助平台的介绍 2557696
邀请新用户注册赠送积分活动 2479527