The defects of low pressure die casting A356 aluminum alloy wheels were investigated.The microstructure,mechanical properties and tensile fracture morphologies at different position of the wheels were observed and analyzed.The results show that the average secondary dendrite arm spacings(SDAS)of the wheel rib and wheel center were 48 μm and 55 μm,respectively.The casting defects including shrinkage cavity,shrinkage porosity and pore were discovered in wheel rib and wheel center.Moreover,the eutectic silicon with bad modification,needle-like and fishbone iron bearing compound,segregation of eutectic silicon were found in some regions,which could affect the over-all properties of wheels,but in the wheel rim the grains were fine and the eutectic silicons were well modified.To improve the quality of castings,the defects that easy occur in low pressure die cast aluminum alloy wheels were summarized and some improvement measures were brought forward.